Ships from our US warehouse · 30-day returns

Stainless Steel Duct Clamps, Pack of 4 – Worm-Drive, 4 or 6 Inch Duct

$12.99 – $14.99
  • Pack of 4 worm-drive clamps in stainless steel, stamped 304 on the band
  • Choose the size for 4 inch or 6 inch flexible duct
  • Tighten with a screwdriver; the band adjusts to the duct you are joining
  • Holds duct onto a fan collar, flange or fitting
  • Flat-rate US shipping from our US warehouse · 30-day returns

Description

Hold your duct on firmly at every joint

These stainless steel clamps tighten a flexible duct hose onto a fan collar, flange or adapter. Slide a clamp over the duct end, push the duct onto the fitting, then turn the screw to draw the band snug.

They come four to a pack, enough for both ends of two duct runs. Pick the size that matches your duct, 4 inch or 6 inch.

Highlights

  • Stainless steel band: stamped 304 on the band, so it suits damp grow tents, greenhouses and mist setups.
  • Worm-drive screw: turn it with a screwdriver to tighten or loosen the band.
  • Adjustable band: the slotted band lets you set the grip to your duct and fitting.
  • Two sizes: one pack for 4 inch duct, one for 6 inch duct.

Works well for

  • Joining flexible duct to an inline duct fan
  • Securing duct on a fan collar or flange
  • Mushroom fruiting chambers and grow tents with ducted airflow
  • Greenhouse ventilation runs

Which one do I need?

Option Choose it for
4 inch duct 4 inch flexible duct and 4 inch fan collars
6 inch duct 6 inch flexible duct and 6 inch fan collars

How to fit a clamp

  1. Loosen the screw until the band opens wide enough to pass over the duct.
  2. Slide the clamp onto the duct end, then push the duct onto the collar or fitting.
  3. Place the clamp over the overlap, away from the very end of the duct.
  4. Turn the screw with a screwdriver until the duct is held firmly. Do not over-tighten.

Specifications

Material Stainless steel, stamped 304 on the band
Type Worm-drive, adjustable
Pack size 4 clamps
Duct size 4 in (about 10 cm) or 6 in (about 15 cm), depending on the option you choose

What’s in the box

  • 4 stainless steel duct clamps (clamps only; duct, fan and fittings sold separately)

Safety and care

  • Check the clamp and duct are snug before you switch the fan on.
  • Re-tighten if the duct feels loose after the first few days of use.

Frequently asked questions

Which duct do these go with?
Our 4 inch flexible duct takes the 4 inch pack. Our 6 inch flexible duct takes the 6 inch pack.

Can I use one clamp on a different size of duct?
Measure the outside of your duct over the fitting first. If you are unsure, email support@fogmister.com with the measurement and we will help you pick.

Shipping and returns

Flat-rate shipping within the United States from our US warehouse: one shipping charge per order, shown in your cart before you pay. 30-day returns. See our Shipping Policy and Returns & Refunds.