Ships from our US warehouse · 30-day returns

Clear Flexible PVC Tubing – 33 ft (10 m), Four Sizes from 4 x 6 mm to 10 x 13 mm

$12.99 – $19.99
  • Clear flexible PVC tubing, one 10 m (33 ft) length
  • Four sizes: 4 x 6, 6 x 9, 8 x 11 or 10 x 13 mm (inner x outer)
  • For water top-up lines, drains and feeds around a fogger tub
  • Tubing only: no fittings included
  • Flat-rate US shipping from our US warehouse · 30-day returns

Description

One clear line for top-ups, drains and water runs

This is a single 10 m (33 ft) length of flexible clear PVC tubing. Because it is clear, you can see water moving through it, which helps when you set up a top-up line, a drain or a feed to a fogger tub. Choose from four sizes by inner and outer diameter.

Cut it to the lengths you need with a sharp blade. It is plain tubing with no braid and no fittings, so match it to your pump, valve or barb by the inner diameter.

Highlights

  • Clear single-layer PVC: you can check for flow and trapped air at a glance.
  • Four sizes: 4 x 6, 6 x 9, 8 x 11 and 10 x 13 mm (inner x outer).
  • 10 m (33 ft) in one piece: enough to cut several runs for a tub, a tank or a bench setup.
  • Flexible: bends into place without a braid or reinforcement to fight.
  • Cuts with a blade: make each run exactly the length you need.

Works well for

  • Water top-up lines to a mist maker tub from a small pump or float valve
  • Drain lines from tubs, trays and enclosures
  • Feed lines for small pumps and misting setups
  • Bench projects and DIY mist module builds

Which one do I need?

Size (inner x outer) Inner diameter in inches Pick it when
4 x 6 mm about 5/32 in Your barb or pump outlet is a small, 4 mm size.
6 x 9 mm about 1/4 in Your fitting is about 1/4 in (6 mm) across.
8 x 11 mm about 5/16 in Your fitting is about 5/16 in (8 mm) across.
10 x 13 mm about 3/8 in You want the widest bore for drains or a faster flow.

Measure the barb or outlet the tube will slide over. The tube’s inner diameter should match it closely, so the tube grips snugly.

How to use it

  1. Measure the barb or outlet and pick the matching inner diameter.
  2. Cut the tubing square with a sharp blade.
  3. Push the end firmly onto the barb. Warm water on the tube end can make it easier.
  4. Run the line so it has no sharp kinks, then check for drips with plain water before you leave it.

Specifications

Material Clear PVC, single layer, no braid
Length 33 ft (10 m), one piece
Sizes (inner x outer) 4 x 6 mm (about 5/32 x 1/4 in), 6 x 9 mm (about 1/4 x 3/8 in), 8 x 11 mm (about 5/16 x 7/16 in), 10 x 13 mm (about 3/8 x 1/2 in)
Wall thickness About 1 mm / 0.04 in (4 x 6 mm) or 1.5 mm / 0.06 in (other sizes)
Working temperature About -5 to +65 °C (23 to 149 °F) (maker’s figure)
Color Clear

What’s in the box

  • 1 length of clear PVC tubing, 10 m (33 ft), in the size you choose

Not included: fittings, barbs, clamps, pumps or valves.

Safety and care

  • Use it for plain water lines only.
  • Keep it away from heat sources and open flame, and stay inside the temperature range above.
  • Check the line from time to time and replace it if it turns stiff, cloudy or cracked.
  • Switch off and unplug any pump before you connect or move the tubing.

Frequently asked questions

Which size fits my pump?
Measure the outlet or barb the tube slides over and pick the inner diameter that matches it. If you are unsure, email support@fogmister.com with a photo and a ruler in the shot.

Do I get fittings?
No. This is tubing only. Browse our Tubing, Fittings & Care section for related items.

How do I keep the inside clear?
Flush the line with clean water now and then. For narrow tubing see our tube cleaning brush set.

Shipping and returns

Flat-rate shipping within the United States from our US warehouse: one shipping charge per order, shown in your cart before you pay. 30-day returns. See our Shipping Policy and Returns & Refunds.