Ships from our US warehouse · 30-day returns

Galvanized Steel Y Duct Splitter – 4 Inch (100 mm) with Gasketed Ends

$16.99
  • Splits one 4 in (100 mm) duct line into two
  • Galvanized sheet steel, 0.5 mm thick
  • All three ends are male, with rubber gasket rings
  • Fits round spiral duct, or slide flexible duct over the ends
  • Flat-rate US shipping from our US warehouse · 30-day returns
In stock

Description

Send one duct line two ways

This Y-shaped fitting turns one 4 inch (100 mm) duct into two. It is made from thin galvanized sheet steel, and all three ends are male, so they fit into round spiral duct, and flexible duct slides over them. Each end carries a rubber gasket ring.

It suits grow tent and greenhouse owners who want one fan to feed or draw air from two places.

Highlights

  • Y-shaped three-way branch: one inlet, two outlets.
  • Galvanized sheet steel, 0.5 mm thick, so it is light to hang or fit.
  • Rubber gasket rings on the ends to help the duct sit snugly on the fitting.
  • Male ends: they fit into round spiral duct, and flexible duct slides over them.
  • 4 inch (100 mm) size, the same nominal size as our 4 inch duct and clamps.

Works well for

  • Splitting a 4 inch duct line inside a grow tent
  • Feeding two spots in a greenhouse from one fan
  • Mushroom growing set-ups that need air moved in two directions

How to fit it

  1. Measure your duct. This fitting is made for 4 inch (100 mm) duct.
  2. Push the duct over each male end, past the gasket ring.
  3. Add a duct clamp at each joint if you want it held firmly.

Specifications

Material Galvanized sheet steel
Thickness 0.5 mm (about 0.02 in)
Size 4 in (100 mm)
Shape Round, Y-shaped three-way branch
Ends All three male, with rubber gasket rings
Fits Round spiral duct and flexible duct; a female coupler is needed to join it to other male fittings

What’s in the box

  • 1 Y duct splitter (duct, fan and clamps sold separately)

Safety and care

  • Thin steel can have sharp edges. Wear gloves when you handle and fit it.
  • Keep the fitting dry when it is not in use.

Frequently asked questions

What duct does it go with?
Our 4 inch flexible aluminum duct is the same 4 inch size, and our stainless duct clamps hold the joints.

Can I connect it straight to a fan?
The ends are male, so check your fan’s outlet first. See our fans and ducting range, or email support@fogmister.com with a photo.

Shipping and returns

Flat-rate shipping within the United States from our US warehouse: one shipping charge per order, shown in your cart before you pay. 30-day returns. See our Shipping Policy and Returns & Refunds.