Free standard shipping on every US order · 30-day returns
New

Ultrasonic Mist Maker Kit – Stainless Steel, 2 to 12 Heads, with Waterproof Power Supply

$129.95
  • Choose 2 to 12 heads. More heads, more fog.
  • Cool fog from plain water, with no fog fluid and no heat
  • 304 stainless steel plate with low-water shut-off
  • Waterproof IP67 power supply with US plug included
  • Free US shipping from our US warehouse · 30-day returns

Description

Real fog from plain water, sized for your setup

This stainless steel ultrasonic mist maker turns ordinary water into a cool, low-hanging fog. Ceramic discs vibrate at ultrasonic speed and break the water surface into a fine mist. There is no heating, no fog fluid and no dry ice involved, just water and electricity.

Choose 2 to 12 heads. Every head adds fog, so the same design covers a tabletop fountain, a mushroom fruiting tent, a greenhouse bench or a whole backyard pond.

Why people choose it

  • Pick your size: 2, 4, 6, 8, 10 or 12 heads. More heads, more fog.
  • Stainless steel plate: a corrosion-resistant 304 stainless steel housing that sits in water all day.
  • Low-water shut-off: a float sensor (the black probe) switches the heads off when the water level drops too low.
  • Independent heads: each head has its own fuse, so if one disc wears out, the others keep working.
  • Waterproof power supply: an IP67-rated aluminum power supply with a US plug and a screw-lock waterproof connector.

Which size do I need?

Heads Approx. fog output* Typical uses
2 heads about 1 L of water per hour Tabletop and garden fountains, bird baths, a single mushroom tote or small fruiting chamber, one reptile or frog room
4 heads about 2 L per hour Small ponds and water features, mushroom grow tents, small greenhouses, porch Halloween displays
6 heads about 3 L per hour Medium ponds and rock gardens, larger grow tents, propagation areas
8 heads about 4 L per hour Larger ponds and waterfalls, hobby greenhouses, yard haunts
10 heads about 5 L per hour Large ponds, greenhouse sections, stage and event effects
12 heads about 6 L per hour The biggest fog: large water features, big displays and events

*Approximate. Output varies with water temperature, water depth, water quality and disc condition. Not sure which size? Read our Size Guide or email us. We’re happy to help you choose.

How it works

  1. Place the plate in water. Put it in your pond, a tub or a fogger bucket, ideally in its float so it always sits at the right depth below the surface.
  2. Connect the power supply. Join the screw-lock connector and plug the power supply into a GFCI-protected outlet, kept dry and off the ground.
  3. Enjoy the fog. Mist rolls off the water surface and drifts with the air. Cooler water and still air give thicker, lower fog.

Where it’s used

  • Ponds and water features: a soft fog layer over koi ponds, fountains, waterfalls and rockeries. Keep it in a shallow, sheltered spot or its own container so fish can’t reach the discs.
  • Mushroom growing: the classic “fogger bucket”: the plate in a tub of water, a small fan pushing fog into your fruiting chamber, and a separate humidity controller switching it on and off.
  • Greenhouses and plants: raises humidity for orchids, tropicals, propagation and seed starting without spraying water on leaves. Use a timer or humidity controller.
  • Halloween, parties and stage: low-lying fog for cauldrons, porches, haunts and photo shoots, with no fog fluid and no dry ice to buy.
  • Reptile and amphibian rooms: fog a reservoir outside the enclosure and pipe the fog in. Check the humidity your species needs.

Specifications

Technology Ultrasonic atomization (vibrating ceramic discs)
Plate material 304 stainless steel
Heads 2, 4, 6, 8, 10 or 12 (choose above)
Approx. output About 0.5 L of water per head per hour (see table)
Power supply Waterproof IP67 aluminum power supply, 110–120V US plug, matched to the number of heads
Connector 2-pin screw-lock waterproof connector
Protection Low-water float sensor; individual fuse per head; over-current, overload, overheat and short-circuit protection in the power supply
Lighting No LEDs. For colored light, see our 10-Head LED Mist Maker.

What’s in the box

  • Stainless steel ultrasonic mist maker plate (your chosen number of heads)
  • Waterproof power supply with US plug
  • Float set to hold the plate at the right depth
  • Spare ceramic discs and a disc tool

Safety and care

  • Only the plate goes in the water. The power supply and its connector must stay dry and out of the water, in a ventilated spot.
  • Outdoors, use a GFCI-protected outlet.
  • Never run the plate dry, and keep fingers away from the discs while it’s running.
  • Unplug before handling, cleaning or changing discs.
  • Clean, soft or filtered water means less white mineral scale and longer disc life. Clean the discs gently. See our care guide.

Frequently asked questions

Does it use chemicals or fog fluid?
No. It only uses water. The fog is tiny water droplets made by ultrasonic vibration.

Will the fog stay low to the ground?
Ultrasonic fog is cool and tends to roll and sink, especially from cold water in still air. Wind and warm, dry air make it disappear faster.

Can I put it straight into my fish pond?
Many pond owners do, but we recommend a shallow, sheltered spot or a separate container so fish can’t nibble the discs and current doesn’t push the float around.

Does it make the area wet?
Fog adds moisture to the air, and surfaces close to a large unit will get damp over time. For plants and mushrooms, use a humidity controller or timer.

Can I control the amount of fog?
This kit runs at full output. To control it, switch it with a timer or humidity controller, or choose fewer heads. For an adjustable fog dial, see our single-disc LED mist maker.

Do the discs wear out?
Yes, like any ultrasonic fogger. Spare discs are included, and each head can be serviced on its own.

Shipping and returns

Free standard shipping within the United States from our US warehouse. 30-day returns. See our Shipping Policy and Returns & Refunds for details.