USB-C Mist Maker Module Kit – Single Disc, 3 Fog Levels, 5 V
- Bare driver board with USB-C power input (5 V) and a push button for 3 fog levels
- Kit includes one atomizer disc on a lead, a holder and a cotton wick
- Small board, about 35 × 19 mm (1.4 × 0.75 in), for your own fog projects
- USB charger and cable not included
- Flat-rate US shipping from our US warehouse · 30-day returns
Description
A small, low-voltage fog module for your own builds
This kit is for makers. It is a bare circuit board that drives one micro-mesh atomizer disc from a 5 V USB-C supply. A push button on the board steps through three fog levels, so you can tune the output for a prop, a display or a small project box.
It is not a finished mist maker: there is no tank, case or lid. You supply the water container, the housing and a USB power source.
Highlights
- USB-C power: runs from DC 5 V, so a phone-style USB charger or power bank with a cable will do.
- 3 fog levels: press the button on the board to step through the settings.
- Compact board: about 35 × 19 mm (1.4 × 0.75 in), 1.2 mm thick, with mounting holes.
- Low power: rated 300 mA, 1.5-2 W (maker’s figures).
- Complete set: board, disc with lead, holder and cotton wick in one kit.
Works well for
- Homemade fog props and Halloween builds
- Terrarium and display mist projects
- Small plant-propagation boxes
- School and hobby electronics projects
How to set it up
- Plug the disc lead into the 2-pin port on the board.
- Fit the disc and wick in your own water container using the holder, keeping the board and USB port well away from water.
- Connect a USB-C cable and a 5 V USB charger.
- Press the button to choose a fog level.
Specifications
| Input | DC 5 V via USB Type-C |
|---|---|
| Rated current | 300 mA (maker’s figure) |
| Power | 1.5-2 W (maker’s figure) |
| Atomizing frequency | 108 kHz ± 2 kHz (maker’s figure) |
| Board size | 35 × 19 mm (1.4 × 0.75 in), 1.2 mm thick |
| Fog control | Push button, 3 levels |
| Disc connector | 2-pin port on the board |
| Cotton wick | About 100 mm (4 in) |
What’s in the box
- 1 driver board with USB-C input
- 1 atomizer disc with lead
- 1 holder
- 1 cotton wick
- Not included: USB charger, USB cable, water container or housing
Safety and care
- This is an exposed circuit board. Keep it dry and mount it where water cannot reach the board or the USB port.
- Do not run the disc dry.
- Use a 5 V supply only.
- Keep it away from small children; it is a hobby part, not a toy.
Frequently asked questions
Does it come with a charger?
No. You need a 5 V USB power source and a USB-C cable.
Do I need a bigger kit?
For more heads see the 4-head and 6-head module kits.
Shipping and returns
Flat-rate shipping within the United States from our US warehouse: one shipping charge per order, shown in your cart before you pay. 30-day returns. See our Shipping Policy and Returns & Refunds.









Rating & Review
There are no reviews yet.