Ships from our US warehouse · 30-day returns

USB-C 6-Head Mist Maker Module Kit – Board, 6 Discs, Holders and Wicks

$19.99
  • Six-channel USB-C driver board with six atomizer discs on 40 cm leads
  • Includes 6 holders and 6 cotton wicks
  • Runs from a 5 V USB supply (charger not included)
  • Bare board for makers: about 2.6 × 1.2 in (6.7 × 3 cm)
  • Flat-rate US shipping from our US warehouse · 30-day returns
In stock

Description

Six mist outlets from one USB-C supply

This is a hobby electronics kit for makers who build their own mist and fog projects. A small bare circuit board with six disc connectors drives six atomizer discs at once, so you can feed a larger prop, a display or a propagation box from a single USB-C connection.

The kit includes everything on the board’s side of the build: six discs on leads, six plastic holders and six cotton wicks. You supply the USB charger, a container for water and the enclosure.

Highlights

  • Six channels: six two-pin disc sockets on one board, one for each atomizer disc.
  • USB-C input: runs from a 5 V USB supply, so no mains wiring is needed on your side.
  • Long disc leads: each disc has a lead of about 16 in (40 cm), so the board can sit away from the water.
  • Holders and wicks included: six holders and six 100 mm cotton wicks come in the kit.
  • Compact board: about 2.6 × 1.2 in (6.7 × 3 cm), small enough to fit inside a prop or box.

Works well for

  • Halloween props and cauldrons that need several fog outlets
  • Display and diorama mist
  • DIY propagation or humidity boxes
  • Electronics and maker projects that need a multi-disc driver

How to set it up

  1. Fit each disc into a holder and slide a cotton wick into the holder, as shown in the photos.
  2. Plug each disc lead into one of the six sockets on the board.
  3. Mount the board in a dry spot above the water line and set the discs in your water container.
  4. Connect a 5 V USB-C charger (not included) to the board.

Specifications

Channels 6
Input USB Type-C, 5 V USB power
Board size About 6.69 × 3.00 cm (2.63 × 1.18 in)
Disc connector Two-pin PH2.0 plug on each disc lead
Disc lead length About 40 cm (16 in)
Cotton wick length 100 mm (about 4 in)
Holder size 25 × 38 mm (about 1 × 1.5 in)
Disc frequency About 108 kHz (maker’s figure)

What’s in the box

  • 1 six-channel USB-C driver board
  • 6 atomizer discs with 40 cm leads
  • 6 holders
  • 6 cotton wicks

Not included: USB charger or cable, water container, enclosure.

Safety and care

  • The board is bare, with no case. Keep it dry and away from splashes.
  • This kit is for people comfortable with simple low-voltage projects.
  • Use a USB charger rated for 5 V.
  • Do not run the discs dry: keep the wicks standing in water while the board is on.

Frequently asked questions

Do I need a charger?
Yes. The kit has no power supply, so you need your own 5 V USB-C charger and cable.

Need fewer outlets?
See the 4-head kit or the single-head kit.

Shipping and returns

Flat-rate shipping within the United States from our US warehouse: one shipping charge per order, shown in your cart before you pay. 30-day returns. See our Shipping Policy and Returns & Refunds.