Ships from our US warehouse · 30-day returns

USB-C Mist Maker Module Kit – Single Disc, 3 Fog Levels, 5 V

$12.99
  • Bare driver board with USB-C power input (5 V) and a push button for 3 fog levels
  • Kit includes one atomizer disc on a lead, a holder and a cotton wick
  • Small board, about 35 × 19 mm (1.4 × 0.75 in), for your own fog projects
  • USB charger and cable not included
  • Flat-rate US shipping from our US warehouse · 30-day returns
In stock

Description

A small, low-voltage fog module for your own builds

This kit is for makers. It is a bare circuit board that drives one micro-mesh atomizer disc from a 5 V USB-C supply. A push button on the board steps through three fog levels, so you can tune the output for a prop, a display or a small project box.

It is not a finished mist maker: there is no tank, case or lid. You supply the water container, the housing and a USB power source.

Highlights

  • USB-C power: runs from DC 5 V, so a phone-style USB charger or power bank with a cable will do.
  • 3 fog levels: press the button on the board to step through the settings.
  • Compact board: about 35 × 19 mm (1.4 × 0.75 in), 1.2 mm thick, with mounting holes.
  • Low power: rated 300 mA, 1.5-2 W (maker’s figures).
  • Complete set: board, disc with lead, holder and cotton wick in one kit.

Works well for

  • Homemade fog props and Halloween builds
  • Terrarium and display mist projects
  • Small plant-propagation boxes
  • School and hobby electronics projects

How to set it up

  1. Plug the disc lead into the 2-pin port on the board.
  2. Fit the disc and wick in your own water container using the holder, keeping the board and USB port well away from water.
  3. Connect a USB-C cable and a 5 V USB charger.
  4. Press the button to choose a fog level.

Specifications

Input DC 5 V via USB Type-C
Rated current 300 mA (maker’s figure)
Power 1.5-2 W (maker’s figure)
Atomizing frequency 108 kHz ± 2 kHz (maker’s figure)
Board size 35 × 19 mm (1.4 × 0.75 in), 1.2 mm thick
Fog control Push button, 3 levels
Disc connector 2-pin port on the board
Cotton wick About 100 mm (4 in)

What’s in the box

  • 1 driver board with USB-C input
  • 1 atomizer disc with lead
  • 1 holder
  • 1 cotton wick
  • Not included: USB charger, USB cable, water container or housing

Safety and care

  • This is an exposed circuit board. Keep it dry and mount it where water cannot reach the board or the USB port.
  • Do not run the disc dry.
  • Use a 5 V supply only.
  • Keep it away from small children; it is a hobby part, not a toy.

Frequently asked questions

Does it come with a charger?
No. You need a 5 V USB power source and a USB-C cable.

Do I need a bigger kit?
For more heads see the 4-head and 6-head module kits.

Shipping and returns

Flat-rate shipping within the United States from our US warehouse: one shipping charge per order, shown in your cart before you pay. 30-day returns. See our Shipping Policy and Returns & Refunds.