Ships from our US warehouse · 30-day returns

USB-C 4-Head Mist Maker Module Kit – Driver Board, 4 Discs, Holders and Wicks

$16.99
  • Four-channel driver board runs four atomizer discs from a 5 V USB-C supply
  • Includes 4 discs on 25 cm (about 10 in) leads, 4 holders, 4 cotton wicks and 4 springs
  • Compact board, 58.7 x 19.6 mm (2.31 x 0.77 in), for DIY fog props and builds
  • USB charger not included; a hobby kit for makers, not a finished mist maker
  • Flat-rate US shipping from our US warehouse · 30-day returns
In stock

Description

Four fog outlets from one small USB-C board

This is a do-it-yourself kit for makers. A small four-channel driver board powers four atomizer discs, and the holders and cotton wicks let you build the discs into your own container, prop or display. Plug the board into a 5 V USB-C supply and each disc makes a fine mist.

It is a bare circuit board and loose parts, not a finished mist maker. You supply the water tank or bowl, the case and the USB power.

Highlights

  • Four channels on one board: one driver runs all four discs, so you can spread mist across several outlets.
  • USB-C input, 5 V: power it from a USB charger or power bank with a USB-C lead (not included).
  • Complete parts set: discs, holders, cotton wicks and springs are all in the kit.
  • 25 cm (about 10 in) disc leads: each disc plugs into its own socket on the board.
  • Small board: 58.7 x 19.6 mm and 9.5 mm high, easy to tuck into a prop or enclosure.

Works well for

  • Halloween props and display fog with several outlets
  • Mushroom and propagation tent builds
  • Tabletop mist features and school or hobby electronics projects

How to set it up

  1. Plan your build: each disc sits in a holder with a wick that reaches down into the water.
  2. Mount the discs and holders in your container, and keep the board and USB connector away from water.
  3. Plug each disc lead into a socket on the board.
  4. Fill your container with plain water, then connect a 5 V USB-C supply.

Specifications

Input USB Type-C, 5 V DC
Heads 4 atomizer discs
Board size 58.7 x 19.6 mm (2.31 x 0.77 in), 9.5 mm (0.37 in) high
Disc lead length 25 cm (about 10 in)
Supplied parts Driver board, 4 discs, 4 holders, 4 cotton wicks, 4 springs, bracket frames
Mains plug None; runs on low-voltage USB power

What’s in the box

  • 1 four-channel driver board with USB-C port
  • 4 atomizer discs with 25 cm leads
  • 4 disc holders
  • 4 cotton wicks
  • 4 springs
  • Bracket frames as shown in the photo

Not included: USB charger or USB-C cable, water container, case or mounting hardware.

Safety and care

  • This is a bare electronic board. Keep the board, connectors and USB port dry and away from splashes.
  • Use plain water only, and keep the wicks standing in water while the board is on so the discs do not run dry.
  • Unplug the supply before moving the discs or changing the water.
  • Keep it out of reach of young children. It is intended for adult hobbyists.

Frequently asked questions

Do I need a USB charger?
Yes. The board takes 5 V through its USB-C port and no charger is included.

Is this a ready-to-use mist maker?
No. It is a kit of parts for your own build. For a finished unit, see our Mist Makers.

Need fewer or more heads?
See the single-head kit or the 6-head kit.

Shipping and returns

Flat-rate shipping within the United States from our US warehouse: one shipping charge per order, shown in your cart before you pay. 30-day returns. See our Shipping Policy and Returns & Refunds.