Two-Outlet Hose Tap Timer – LCD, Battery Powered, 3/4 in Hose Thread
- One tap in, two outlets out, each timed separately
- Large LCD with a dial and buttons for run time and interval
- Run time from 10 seconds to 99 hours; interval from 1 minute to 7 days (maker’s figures)
- Runs on 2 AA batteries (not included)
- Flat-rate US shipping from our US warehouse · 30-day returns
Description
Two watering or misting lines from one tap, on two schedules
This timer screws onto a garden tap and splits the flow into two outlets. Each outlet runs on its own schedule, so a misting line over your seedlings can run briefly and often while a drip line to the beds runs longer and less often.
It has a large LCD, a selector dial and push buttons. It runs on two AA batteries, so there is no wiring and no power outlet to find. Hose connections use standard 3/4 in garden hose thread.
Highlights
- Two independent outlets: set separate run times and intervals for zone 1 and zone 2.
- Wide run-time range: from 10 seconds to 99 hours per run (maker’s figure).
- Wide interval range: repeat every 1 minute up to every 7 days (maker’s figure).
- Large LCD: shows the time, run time, interval and next start at a glance.
- Battery powered: takes 2 AA alkaline batteries; batteries are not included.
- Inlet screen: a small mesh screen sits in the tap inlet.
Works well for
- Greenhouse misting lines and propagation benches
- Garden beds and pots on two separate hoses
- Short, frequent bursts for misting nozzles
- Longer, less frequent soaks for larger plants
How to set it up
- Open the battery cover on the back and fit 2 AA batteries.
- Screw the inlet onto your tap by hand. Screw a hose onto each outlet you plan to use.
- Set the clock, then set the start time, run time and interval for each zone.
- Turn the tap on fully and check each outlet with a test run.
Specifications
| Outlets | 2 independent outlets (2 zones), 1 inlet |
|---|---|
| Hose connections | Standard US garden hose thread, 3/4 in |
| Run time | 10 seconds to 99 hours (maker’s figure) |
| Interval | 1 minute to 7 days (maker’s figure) |
| Water pressure | About 3-8 bar (about 44-116 psi) (maker’s figure) |
| Operating temperature | 0-40 °C (32-104 °F) (maker’s figure) |
| Power | 2 AA alkaline batteries (not included) |
| Housing | ABS plastic |
| Size | About 5.9 × 5.5 × 2.2 in (15 × 14 × 5.5 cm) |
What’s in the box
- 1 two-outlet hose tap timer
Batteries, hoses and nozzles are not included.
Safety and care
- Check your water pressure against the range above. The timer needs at least about 44 psi (3 bar) at the tap, so fit any pressure regulator after the timer, on the outlet that feeds a drip line that needs lower pressure, not between the tap and the timer.
- Replace the batteries at the start of the season so a run is not missed.
- Take the timer indoors when freezing weather is expected.
- Unscrew the hoses and let the timer drain before you store it.
Frequently asked questions
Do I need to use both outlets?
No. You can use one outlet and leave the other unused.
What do I connect to the outlets?
Any hose or fitting with standard 3/4 in garden hose thread. For a misting line, see our garden and greenhouse misting kit.
My drip line needs lower pressure. What should I do?
Screw our 25 psi garden hose pressure regulator onto the timer outlet that feeds the drip line. Keep it off the tap side: the timer itself needs at least about 44 psi (3 bar) to work (maker’s figure).
Shipping and returns
Flat-rate shipping within the United States from our US warehouse: one shipping charge per order, shown in your cart before you pay. 30-day returns. See our Shipping Policy and Returns & Refunds.

















Rating & Review
There are no reviews yet.